MoviePro - Pro Video Camera1.0.6

Make every shot your own. MoviePro brings manual camera control, professional recording formats, live scopes and audio tools to iPhone and iPad. Shoot films, documentaries, music performances, field reports and everyday moments with a setup that fits the scene. All capture modes are free.

PRO CONTROL, READY TO SHOOT

Start in Pro with direct access to ISO, shutter speed or angle, white balance, tint, focus and zoom. Use automatic settings where you need them and take manual control where it matters. Adjust aperture on supported variable-aperture cameras. Set A/B focus and zoom points for repeatable moves, and save camera setups as presets for your next shoot.

Switch to Auto for fast-moving situations. Tap to place focus and exposure, use focus or exposure lock, hold white balance, and adjust brightness and motion blur without managing every setting yourself.

RECORD FOR YOUR WORKFLOW
. 4K, 1080p and 720p with H.264 or HEVC
. ProRes 422, HQ, LT and Proxy on supported devices
. Full-sensor ProRes RAW and RAW HQ to a compatible external SSD or ProVideo Storage on device
. Apple Log and Apple Log 2, SDR and HDR recording
. Frame rates up to 240 fps where supported, with exact NTSC rates in Pro
. Time of Day or Record Run timecode on supported recording paths
. Aspect-ratio guides and crops, anamorphic desqueeze and 35mm adapter flip
. Selectable stabilization and Long-Record Mode for extended takes

SEE YOUR LOG FOOTAGE IN COLOR

View Apple Log and Apple Log 2 as Original Log, Rec.709 or Rec.2100 HLG HDR. Keep the viewing transform in the preview while recording the original Log image, or bake the selected look into supported recordings. Preview and recording choices stay explicit, so you know what you are saving.

JUDGE THE IMAGE

Open the waveform, RGB parade, Vectorscope or Histogram to evaluate exposure and color. Check focus with peaking and exposure with zebras, false color and clipping indicators. Send a clean HDMI picture to a compatible external display.

HEAR WHAT YOU ARE RECORDING

Connect a wired microphone, USB audio interface, wireless receiver or supported Bluetooth microphone. Select your audio source, adjust available input gain and monitor through headphones. Expanded meters and peak hold help you watch levels, with warnings for clipping, silence and disconnection. Choose AAC, LPCM or 32-bit Float audio where supported.

TWO CAMERAS, ONE MOMENT

Use Dual Capture on compatible devices to record two angles together. Choose picture-in-picture, split screen, separate files or switching between cameras in a single recording. Move and resize the picture-in-picture inset while filming.

DIRECT FROM ANOTHER DEVICE

With the Remote Control purchase, use another iPhone or iPad to see the camera's live picture, adjust supported controls and start, pause or stop a take over Wi-Fi or Personal Hotspot. Compatible Apple-silicon Macs can also act as controllers using the iPad app. Apple Watch offers preview and start/stop control.

KEEP TRACK OF YOUR TAKES

Record to the MoviePro Library, Photos, Files or compatible external storage. Check storage and thermal status during a shoot. Review Take Receipts and clip information for recording details and warnings, mark Favorites or Good Takes, and share your footage. Dedicated iPad layouts work in portrait and landscape.

FREE CAMERA. OPTIONAL REMOTE CONTROL.

Use Auto, Pro, scopes, presets and Dual Capture without a recording purchase. Unlock Remote Control with a one-time purchase; no subscription is required. Eligible previous purchases can be restored in the app.

Features, formats and frame rates vary by device, operating system, camera and recording setup.

Support: support@moviepro.app
Privacy Policy: https://www.moviepro.app/Privacy-Policy.html
Terms of Use: https://www.apple.com/legal/internet-services/itunes/dev/stdeula/

Version History • Fixed a bug where a take could be marked as corrupted when storage ran out, even though the footage was saved.
• Dual Capture: both files now record sound.
• Set ISO without your shutter speed changing on its own.
• 29.97 and 59.94 fps recordings stay smooth after you change settings.
• ProRes RAW Open Gate can now record at up to 60 fps.
• Performance updates in camera startup time
• The storage indicator shows seconds when you're almost out of space.
• Shared clips keep their names. 1.0.6 5d ago What's new in 10.0.5

More reliable recording
• Fixed rare cases where stopping right after starting, or an interruption just as a take began, could end without a saved clip.
• If a take can't start, MoviePro now tells you instead of failing quietly.

Apple Log
• Zebras and focus peaking now work while you record Apple Log or Apple Log 2.

Clearer settings
• Long-Record Mode and ProRes RAW: audio settings and 35mm Flip now show only what those modes can actually record.
• The Pro Video Storage alert now takes you straight to the setting.

A calmer camera screen
• Heat and sensor-pressure warnings now appear only when they're critical.
• The audio-clipping pop-up is gone; the meters still show your levels.
• The timer stays in place, dimmed, while a take finishes saving.

If you like, please do not forget to leave a 5 star rating or review in AppStore. For any concerns or feedback, feel free to contact us at support@moviepro.app .

New: the full MoviePro user guide and FAQs are now on our website, moviepro.app. If you're a content creator or filmmaker who uses MoviePro a lot, email us about collaborating. v10.0.5 Oct 4 • MoviePro 10.0.4

• Added variable-aperture controls on iPhone 18 Pro/18 Pro Max devices, with improved shutter, ISO and exposure-lock handling.
• Preview Apple Log and Apple Log 2 in Rec.709 or HLG HDR, or bake the selected look into supported recordings.
• Improved thermal performance with more efficient video processing for preview, exposure assists and recording.
• Added iOS 27 Pro Video Storage support, including ProRes RAW recording on compatible devices.
• Improved clean HDMI output and live switching.
• Improved Remote portrait layouts, preview orientation, camera controls and connection handling. Support for vertical mode UI in Remote control.
• Clearer Take Receipts and recording-interruption messages.
• Fixed Dual Capture launch crashes on unsupported devices and improved compatibility with older iPads. 10.0.4 Sep 30 • MoviePro 10.0.3 brings more precise control, improved image processing and a more polished shooting experience.

• Fixed zoom stalls and improved the responsiveness of zoom rockers and manual zoom controls.

• Improved the color-processing pipeline to preserve camera color more accurately, including SDR Rec.709 handling.

• Enhanced white-balance locking with a guided gray-card workflow in Pro and clear confirmation of the locked temperature and tint.

• Added independent Focus and Exposure locks in Auto, with larger touch targets and clearly visible lock states.

• Added selectable Record Run and Time of Day timecode. Record Run advances with recorded footage across takes; Time of Day uses the device’s local clock. Improved timecode accuracy on supported recording paths.

• Refined the UI throughout, with clearer recording indicators, improved control layouts, better legibility and more consistent iPhone and iPad experiences.

• Redesigned Pro presets with easier saving, updating and reordering, plus more reliable restoration of camera settings.

• Restored dynamic picture-in-picture controls in Dual Capture: move, resize, hide and restore the inset while recording.

• Expanded Remote controls for lens selection, torch and stabilization, with more accurate camera-state feedback, improved preview orientation and connection fixes.

• Added remote monitoring and control on compatible Apple-silicon Macs running MoviePro’s iPad app.

• Improved microphone routing and recovery after audio-device changes, including a fix for built-in audio remaining at a reduced capture sample rate.

• Improved recording frame timing, refined video-quality levels and optimized processing on supported recording paths.

• Fixed stabilization changes that could stall the preview, improved ProRes RAW preview refresh and corrected incorrect 720p output resolution.

• Improved recording finalization, interruption reporting and save-destination warnings.

• Refreshed first-run setup, improved Library playback and refined numerous everyday interactions.

Timecode tracks are available on supported recording paths; hardware movie-file and ProRes RAW recording do not embed timecode tracks.

Thank you for the feedback that shaped this update. Keep it coming at support@moviepro.app. 10.0.3 Sep 14 MoviePro 10.0.2 puts the controls you use most closer to the shot.

• Auto has a new quick-control bar for Stabilization, Motion Blur, Torch, Grid and Remote.
• A new camera toggle in Auto mode makes switching between the front and rear cameras faster.
• Direct +/− zoom controls now include adjustable zoom speed. Preferred Zoom UI (+/- or zoom rocker) can be enabled in Settings.
• Supported microphones gain manual input-gain control.
• Take Receipts are now off by default and can be enabled at any time in Settings. This keeps the recording view unobstructed, based on user feedback.
• iPad capture controls, audio panels, Settings and Library playback are clearer and better fitted in both orientations.
• Apple Log, Apple Log 2, ProRes SDR and 10-bit HEVC now preserve color and codec intent more accurately.
• Stabilization tiers are resolved against the active camera format, with clearer unavailable states.
• Frame-drop handling is more accurate, and capture-pipeline performance has been optimized for demanding recording formats.
• Numerous fixes and enhancements make recording start and stop, clip finalization when MoviePro moves to the background, lens switching, Long Record codec handling and zoom more reliable.
• UX refinements improve text sizing, legibility and accessibility, addressing feedback about controls that were difficult to read.

NOTE: To switch between the front and rear cameras while recording, select 'Dual' scene and choose 'Cam Switch' as the recording type. Stabilization and zoom in DualCam have also been fixed. Dual scene provides seamless switching between cameras with zero delay.

Thank you for the reports that shaped this update. Keep them coming at support@moviepro.app. 10.0.2 Aug 25 MoviePro 10.0.1 is a stability and fidelity release, built almost
entirely from your reports since the 10.0 launch. Thank you for sending
them — nearly every line below started as an email.
WHERE TO FIND TWO CONTROLS YOU'VE ASKED ABOUT

• Front camera — tap the lens chip at the top right of the viewfinder,
in either Auto or Pro, and choose Front. The chip reads FR while the
front camera is live. Lenses can't be swapped mid-take.

• Stabilization — in Pro, tap the More button at the top right, then
Stabilize: Off, Standard, Cinematic or Extreme. In Auto, MoviePro
manages stabilization for you and shows the mode it chose in the
pre-flight checklist.
FIXED — IMAGE

• Recorded video looked washed out, dull and desaturated next to the
preview. The recording path now states its colour correctly, so what
you see is what lands in the file.
• Stabilization silently switched off after changing lens or flipping to
the front camera, and stayed off until the next settings change.
• Cold-boot recordings could drop to 8-bit despite a 10-bit setting.

FIXED — CRASHES AND FAILED TAKES

• Crash when starting a 4K60 ProRes take on internal storage. ProRes 4K60
now records internally.
• Crash when switching between HDR and SDR with the camera running.
• Crashes when setting focus point, exposure compensation or zoom.
• Crash when switching modes while a session was tearing down.
• DualCam could refuse to start a recording entirely.
• A freeze when tapping Record.

FIXED — FRONT CAMERA AND ORIENTATION

• iPhone 17 Pro: front-camera files recorded upside-down.
• The Mirror Front Cam setting behaved backwards.
• Preview flipped the wrong way when rotating the phone.
• Launching with the front camera saved now starts on the front camera.

FIXED — DUALCAM

• Audio dropped out when switching cameras mid-take.
• The front camera was stretched in composited takes.
• A black first frame at the start of a recording.
• Your PIP position and live camera are restored between sessions.
• Larger, more reliable touch targets throughout.

FIXED — LONG RECORD

• The preview froze after a 4K take or a mode switch.
• Long Record now honours your H.264 and ProRes codec choice instead of
always recording HEVC.
• Remote preview holds a steady frame rate while recording 4K.

FIXED — ELSEWHERE

• "Frames Dropping" warnings counted preview frames as lost footage —
they now report only what actually left your recording.
• The Take Receipt could mislabel the frame rate of a clip.
• Storage warnings no longer claim a block that isn't there.
• Status pills could creep under the Dynamic Island in portrait.
• Importing a photo could fail without telling you.
NEW

• 100 and 200 fps high-speed recording.
• Volume buttons start and stop recording. Turn it off in Settings ›
Lens & Rig.
• Screen Dimmer gains a Black level — hide the preview completely while
recording to save power.
• A time-of-day timecode track on recorded files, for DaVinci Resolve
and Final Cut Pro.
• Pro capture settings — ISO, shutter angle, white balance, lens,
aperture, stabilization — embedded in every Pro file.
• Tap the gold badge on a preset to deselect it.
• Tap to Hide Interface, with an explanation of what it does.
• A support diagnostics block, so a bug report can carry the facts we
need to fix it.
Keep the reports coming — support@moviepro.app. They work. 10.0.1 Aug 13 MoviePro 10 is a ground-up rewrite — new capture engine, new interface, new everything.

• All-new Auto mode that makes the pro exposure, focus and white-balance decisions for you
• Rebuilt Pro mode: precision manual rails for ISO, shutter, white balance, tint, focus and zoom, plus A/B focus pulls
• Presets, expanded: one-tap Pro setups — Interview, Field Report, Music Performance, YouTube Studio, Cinematic Log
• ProRes, Apple Log and 10-bit HDR recording
• Exact NTSC capture at 23.98, 29.97 and 59.94 fps in Pro mode on supported devices
• Live waveform, vectorscope and RGB parade scopes
• DualCam: record front and back cameras at once
• Remote-control a second iPhone over your local network
• Take Receipt after every clip — know exactly what you shot
• Redesigned library, full iPad layouts, and a new Apple Watch app

To longtime MoviePro users: thank you for your patience. This rewrite is for you — and everything you already paid for stays yours. If you have any concerns, please contact us at support@moviePro.app 10.0 Aug 6 - Bug fixes for audio meters not showing in iOS 26.4 version series 9.2 Apr 20 MoviePro 9.1

• Fixed an issue affecting HEVC recording when using the Apple Log 2 color profile
• Added support for high-quality audio recording with Bluetooth microphones
• Expanded audio and video metadata details in the Video Library
• Improved reliability when recording with Apple Watch as a remote
• General stability improvements and performance enhancements

If MoviePro helps you capture with confidence, please consider leaving a 5-star rating and review on the App Store. Your support keeps independent development alive and helps us continue refining the experience.
Interested in beta testing upcoming features? We’d love to hear from you at support@moviepro.app. 9.1 Feb 20 • iOS 26 compatibility
• iPhone 17 series support
• Log2 recording support on iPhone 17 series

We’re entering a phase of continuous development, with significant enhancements actively in development and testing. These improvements will be rolled out progressively in upcoming updates.

Have questions or interested in beta testing major updates?
Write to us at support@moviepro.app. 9.0.8 Feb 8 - Bug fixes 9.0.7 06/14/2024 - Bug fixes 9.0.6 05/20/2024 - Bug fix for still photo button not working
- Other bug fixes 9.0.5 05/18/2024 - Bug fixes & Enchancements

Note: We have migrated to freemium model from paid app with grandfathering clause, meaning existing users who purchased the app before will continue to enjoy upgrades for free. If you notice any issue post update, please try to press the "Restore purchases" button or drop an email to support@moviepro.app. 9.0.4 01/15/2024 - Bug fixes & Enchancements

Note: We have migrated to freemium model from paid app with grandfathering clause, meaning existing users who purchased the app before will continue to enjoy upgrades for free. If you notice any issue post update, please try to press the "Restore purchases" button or drop an email to support@moviepro.app. 9.0.3 01/13/2024 - Bug fixes & Enchancements

Note: We have migrated to freemium model from paid app with grandfathering clause, meaning existing users who purchased the app before will continue to enjoy upgrades for free. If you notice any issue post update, please try to press the "Restore purchases" button or drop an email to support@moviepro.app. 9.0.2 01/12/2024 - Bug fixes & Enchancements

Note: We have migrated to freemium model from paid app with grandfathering clause, meaning existing users who purchased the app before will continue to enjoy upgrades for free. If you notice any issue post update, please try to press the "Restore purchases" button or drop an email to support@moviepro.app. 9.0.1 01/11/2024 - Bug fixes & Enchancements

Note: We have migrated to freemium model from paid app with grandfathering clause, meaning existing users who purchased the app before will continue to enjoy upgrades for free. If you notice any issue post update, please try to press the "Restore purchases" button or drop an email to support@moviepro.app. 9.0 01/11/2024 - Various bug fixes pertaining to HDR videos
- Performance enhancements and more accurate FPS for high FPS videos 8.9.4 11/13/2023 - Bug fixes for recording failures under some resolution/fps settings,
- Bug fixes for ambient viewing environment metadata in HDR videos 8.9.3 10/30/2023 New in Version 8.9:

● Support for iPhone 15/15 pro models
● Apple Log mode on iPhone 15 pro models (Log mode supports both ProRes and HEVC codecs)
● Added ProRes4444 codec for recording
● Record directly to a folder in Files app or mounted external storage device
● iOS 17 compatibility
● Other bug fixes

If you like MoviePro, please spare time to write a 5 star review in the AppStore. Good reviews help to keep us motivated to deliver improvements and new features in the app. For any concerns or support, write to us at support@moviepro.app. 8.9.2 10/27/2023 - Bug fix for broken analytics & Multicam preset

New in Version 8.9:

● Support for iPhone 15/15 pro models
● Apple Log mode on iPhone 15 pro models (Log mode supports both ProRes and HEVC codecs)
● Added ProRes4444 codec for recording
● Record directly to a folder in Files app or mounted external storage device
● iOS 17 compatibility
● Other bug fixes

If you like MoviePro, please spare time to write a 5 star review in the AppStore. Good reviews help to keep us motivated to deliver improvements and new features in the app. For any concerns or support, write to us at support@moviepro.app. 8.9.1 10/26/2023 ● Support for iPhone 15/15 pro models
● Apple Log mode on iPhone 15 pro models (Log mode supports both ProRes and HEVC codecs)
● Added ProRes4444 codec for recording
● Record directly to a folder in Files app or mounted external storage device
● iOS 17 compatibility
● Other bug fixes

If you like MoviePro, please spare time to write a 5 star review in the AppStore. Good reviews help to keep us motivated to deliver improvements and new features in the app. For any concerns or support, write to us at support@moviepro.app. 8.9 10/25/2023 - Various bug fixes, stability improvements, and enhancements 8.8 07/04/2023 - Bug fix for crashes when adding certain external microphone or headphone,
- Bug fixes for crash on iPad devices when opening Save menu

If you like MoviePro, please consider leaving a 5 star review in the AppStore. Good ratings help us to keep serving you better by constantly improving the app. For any issues or feedback, please do contact us at support@moviepro.app. 8.7.3 04/26/2023